Pacific Spectrum Environmental provides in-house training seminars focused on the client company or institution’s needs.
Previous in-house training seminar clients include Neuronemech Corporation, RM Foods, Inc., Nestle Philippines, Inc. in Cagayan de Oro City, First Gas Industrial Corporation, National Engineering Center of the University of the Philippines – Diliman, Holy Angel University in Angeles, Pampanga, and Xavier University College of Engineering in Cagayan de Oro City.
Modules or topics discussed include Industrial Waste Management Seminar: Pollution Prevention and Control Strategies; Environmental Management Accounting Training Workshop; Integrated Waste Management; and IMS Training and Workshop for Compliance to Nestle Philippines Requirements.
Pacific Spectrum Environmental can tailor-suit its training modules to the company or institution’s needs and schedulepreference.
______________________________
PACIFIC SPECTRUM ENVIRONMENTAL
Research and Consultancy, Inc.
Unit 1534 City and Land Mega Plaza
ADB Avenue corner Garnet Road
Ortigas Center, Pasig City 1605
Metro Manila, Philippines
Visit our main site at www.pacific-spectrum.com.
Contact us today!
Telephone No.: (632) 637-8669
Telefax No.: (632) 631-2096
Email: info@pacific-spectrum.com
Sunday, August 16, 2009
Saturday, August 15, 2009
Air Pollution Control: Particulate Matter
One of the usual parameters for emission monitoring of stationary sources is particulate matter (PM).
As based on the National Emission Standards for Source Specific Air Pollutants (NESSAP) which is incorporated in the Implementing Rules and Regulations (IRR) of the Philippine Clean Air Act (CAA), the maximum permissible limit of PM emission concentration for fuel burning equipment such as generator sets, boilers, fire pumps and the likes in an urban and industrial areas, cement plants and smelting furnaces is 150 mg/NCM. For other stationary sources and fuel burning equipment not located in urban and industrial areas, the maximum permissible limit is 200 mg/NCM.
PM emission concentration exceedance to the standard is a problem to some industries. One of the most practical and basic solution to this problem is regular cleaning and maintenance of the chimney or exhaust stack and the equipment itself. Soot and other particles accumulated in the exhaust can contribute to the particulate emission.
Another thing to check is the exhaust stack diameter and sampling porthole location. These equipment specifications contribute to the concentration of the particles collected during emission sampling. Exhaust stacks should conform to design standards so that an accurate and representative PM concentration will be generated from the emission sampling.
For fuel-burning equipment using coconut husks, wood chips or paper, PM emission concentrations can be normally high. If fuel substitution is not an option, gravity settling chambers, mechanical collectors, particulate wet scrubbers, electronic precipitators and fabric filters will be the solution.
These air pollution control equipment are usual fixtures in cement industries for and the same can be used by other industries to regulate their particle emissions. Technical evaluation and assessment will be needed to determine which air pollution control equipment will best suit the system.
Air Pollution Control Systems
Your One-Stop Online Source
For anything and everything
About Air Pollution Control Systems
As based on the National Emission Standards for Source Specific Air Pollutants (NESSAP) which is incorporated in the Implementing Rules and Regulations (IRR) of the Philippine Clean Air Act (CAA), the maximum permissible limit of PM emission concentration for fuel burning equipment such as generator sets, boilers, fire pumps and the likes in an urban and industrial areas, cement plants and smelting furnaces is 150 mg/NCM. For other stationary sources and fuel burning equipment not located in urban and industrial areas, the maximum permissible limit is 200 mg/NCM.
PM emission concentration exceedance to the standard is a problem to some industries. One of the most practical and basic solution to this problem is regular cleaning and maintenance of the chimney or exhaust stack and the equipment itself. Soot and other particles accumulated in the exhaust can contribute to the particulate emission.
Another thing to check is the exhaust stack diameter and sampling porthole location. These equipment specifications contribute to the concentration of the particles collected during emission sampling. Exhaust stacks should conform to design standards so that an accurate and representative PM concentration will be generated from the emission sampling.
For fuel-burning equipment using coconut husks, wood chips or paper, PM emission concentrations can be normally high. If fuel substitution is not an option, gravity settling chambers, mechanical collectors, particulate wet scrubbers, electronic precipitators and fabric filters will be the solution.
These air pollution control equipment are usual fixtures in cement industries for and the same can be used by other industries to regulate their particle emissions. Technical evaluation and assessment will be needed to determine which air pollution control equipment will best suit the system.
Air Pollution Control Systems
Your One-Stop Online Source
For anything and everything
About Air Pollution Control Systems
Sunday, August 9, 2009
Environmental Seminars and Trainings
Engr. Bryan Uy, Managing Director of Pacific Spectrum Environmental, has been a regular resource speaker of Laguna Lake Development Authority (LLDA)‘s Continuing Environmental Education Program and Seminars for Pollution Control Officers (PCO s). The 3-day training programs and 4-hour seminars conducted every month are for the accreditation of PCOs and renewal of Discharge Permit.
Topics discussed by Engr. Bryan Uy are sources of pollution, introduction to environmental management, air pollution control and other environmental topics.
______________________________
PACIFIC SPECTRUM ENVIRONMENTAL
Research and Consultancy, Inc.
Unit 1534 City and Land Mega Plaza
ADB Avenue corner Garnet Road
Ortigas Center, Pasig City 1605
Metro Manila, Philippines
Visit our main site at www.pacific-spectrum.com.
Contact us today!
Telephone No.: (632) 637-8669
Telefax No.: (632) 631-2096
Email: info@pacific-spectrum.com
Topics discussed by Engr. Bryan Uy are sources of pollution, introduction to environmental management, air pollution control and other environmental topics.
______________________________
PACIFIC SPECTRUM ENVIRONMENTAL
Research and Consultancy, Inc.
Unit 1534 City and Land Mega Plaza
ADB Avenue corner Garnet Road
Ortigas Center, Pasig City 1605
Metro Manila, Philippines
Visit our main site at www.pacific-spectrum.com.
Contact us today!
Telephone No.: (632) 637-8669
Telefax No.: (632) 631-2096
Email: info@pacific-spectrum.com
Monday, August 3, 2009
Air Polluion Control Company: Therm-Tec Inc.
All products sold by Therm Tec, Inc. are manufactured at the facility: incinerators, thermal oxidizer systems, crematories, air pollution control equipment, fabric filters, scrubbers, hydraulic systems, computer control systems, electrical control panels (U.L. Listed Panel Shop 508-A) and data acquisition programs, casting and forming of all refractories, welding and pattern cutting.
To read full article, click here.
Air Pollution Control Systems
Your One-Stop Online Source
For anything and everything
About Air Pollution Control Systems
To read full article, click here.
Air Pollution Control Systems
Your One-Stop Online Source
For anything and everything
About Air Pollution Control Systems
Sunday, August 2, 2009
Air Polluion Control Company: Flex-Kleen (A Subsidiary of Met-Pro Corporation)
Flex-Kleen is a leading supplier of dry particulate dust collecting systems for process dust control, product recovery, nuisance dust collection and air pollution control. We offer a complete line of dust collectors for the chemical, plastics & petrochemical, food & dairy, paint & pigments, minerals & clay, cement & rock products, coal & fly ash and pharmaceutical markets. Our products include bin vent filters, welded modules, high-pressure and high vacuum pulse-jet dust collectors, high efficiency cartridge and pleated element filters, and cyclones. We have full service aftermarket capabilities offering collector upgrades, rebuilds and conversions, replacement parts and on-site field services.
To read full article, click here.
Air Pollution Control Systems
Your One-Stop Online Source
For anything and everything
About Air Pollution Control Systems
To read full article, click here.
Air Pollution Control Systems
Your One-Stop Online Source
For anything and everything
About Air Pollution Control Systems
Regulatory Review and Reportorial Requirements for the Environmental Management Bureau (EMB)
Pacific Spectrum Environmental also engages for the preparation of Self Monitoring Reports and ECC Compliance Monitoring Reports for submission to EMB. We also do regulatory review to ensure that you are updated on the upcoming environmental laws and regulations that is given from EMB Central Office, Regional Offices, and local government offices. Notable clients include Intel Technology Philippines, Inc. and Numonyx Philippines, Inc in General Trias, Cavite; New Zealand Creamery, Inc. in Makati; EAC Industrial Ingredients, Inc. in Paranaque and Metastone Manufacturing Corporation in LISP 1 Cabuyao, Laguna.
______________________________
PACIFIC SPECTRUM ENVIRONMENTAL
Research and Consultancy, Inc.
Unit 1534 City and Land Mega Plaza
ADB Avenue corner Garnet Road
Ortigas Center, Pasig City 1605
Metro Manila, Philippines
Visit our main site at www.pacific-spectrum.com.
Contact us today!
Telephone No.: (632) 637-8669
Telefax No.: (632) 631-2096
Email: info@pacific-spectrum.com
______________________________
PACIFIC SPECTRUM ENVIRONMENTAL
Research and Consultancy, Inc.
Unit 1534 City and Land Mega Plaza
ADB Avenue corner Garnet Road
Ortigas Center, Pasig City 1605
Metro Manila, Philippines
Visit our main site at www.pacific-spectrum.com.
Contact us today!
Telephone No.: (632) 637-8669
Telefax No.: (632) 631-2096
Email: info@pacific-spectrum.com
Saturday, August 1, 2009
Air Polluion Control Company: Bionomic Industries
For more than a quarter of a century, Bionomic Industries has been engineering and manufacturing scrubbing equipment and systems for a wide range of air pollution control, abatement, and product recovery applications in the chemical, pharmaceutical, metals, minerals, food, waste treatment, power, gasification and energy, pulp and paper, and wood products industries, and a host of other processing industries.
To read full article, click here.
Air Pollution Control Systems
Your One-Stop Online Source
For anything and everything
About Air Pollution Control Systems
To read full article, click here.
Air Pollution Control Systems
Your One-Stop Online Source
For anything and everything
About Air Pollution Control Systems
Subscribe to:
Posts (Atom)